| Length | 2001 mm |
| Width | 1171 mm |
| Height | 2634 mm |
| Weight | 688 kg |
| Axle mounting diameter to tractor | 28 mm |
| Тип приводу | Тракторний |
| Soft wood max. diameter | 180 mm |
| Hard wood max. diameter | 180 mm |
| Size of splinter | 5...60 mm |
| Quantity of knives | 4 pcs |
| Engine min. power | 50 h.p. |
| Max. turns on PTO | 540 rpm |
Wood shredder MK-170TR Antistress disk type is designed for processing and utilization by grinding branches, rods, duplexes, lamellas and other wood waste. Wood shredder turns raw materials into technological chips. Up to 90% of the resulting chips will be 5 ... 60 mm in size, 10% in free size, when grinding thin branches, it is possible to increase or decrease the fraction. The size of the chips is not regulated and basically depends on the type of feed material. Wood shredder MK-170TR Antistress is capable of cutting branches up to 17 cm in diameter, depending on the moisture and wood species. Finished chips can be used for heating in solid fuel and pyrolysis boilers, fireplaces, stoves and other heating appliances.
Also, wood splinter can be used as mulch material for plants or fertilizer. With further processing from wood chips, it is possible to obtain fuel pellets or granules.
The chipper is equipped with the Antistress system. The system monitors the rotation frequency of the cutting disc and, based on this indicator, independently controls and regulates the supply of raw materials. That is, when feeding thick raw material, the chipper spends a lot of effort on chopping the branch, the revolutions of the tractor begin to fall, the chipper realizes this, turns on the reverse and feeds the branch back, the tractor revolutions are restored and the chipper feeds the branch forward to the cutting disc again.
The operator only needs to bring the branch to the hopper and feed it to the roller. Technology can practically think independently. Thanks to this, labor productivity increases, because the automation knows the most suitable moment to feed the branch to the cutting mechanism. In the case without antistress, the operator relies on his feelings, which may be false.
An important feature is the placement of the input hopper of the chipper at an angle of 90° to the tractor, which allows it to be used in one hitch with a trailer. Such a location of the bunker will be very convenient for utilities and road services, the work can be carried out without interfering with the traffic flow, on the side of the roads.
The working body of the MK-170TR Antistress is a disk on which 4 knives are located, on the opposite side of the disk there are blades which create the necessary air pressure to feed the chips on the unloading funnel. The knives are made of 55WCrV8 steel hich significantly extends the life of the knives of the chipper. Necessarily the knives undergo the heat treatment process on a modern HIGH FREQUENCY INDUCTION HEATING MACHINE installation. The productivity of the MK-170TR Antistress chipper is as much as 12 cubic meters of finished chips per hour of operation. Productivity directly depends on the quality of raw material preparation and the number of personnel involved in the work.
Wood shredder MK-170TR Antistress is powered by PTO tractor and mounted on a standard three-point hitch. The minimum required power of the tractor for working with the chopper is 50 hp. To connect the tractor to the shredder, we recommend using a cardan shaft of class T5 with a friction clutch that protects the chopper and the tractor from overloading. On the wood shredder there is an unloading funnel that allows you to change the direction of the flow of chips in two planes and rotates by 360˚. By raising the shredder on the hydraulic coupler, you can increase the loading height. The input hopper is equipped with a transparent PVC shutter to protect the operator from chips during operation.
The wood shredder MK-170TR Antistress is completely manufactured at our enterprise. We control the quality of all stages of our production, all landing surfaces are obligatory grinding. Quality control of welded joints is carried out. Before painting, all structures are stripped. The wood shredder is covered with powder paint, which significantly extends the service life of the structures.We are confident in our products, so we provide a 36-month guarantee for wood shredder MK-170TR Antistress. In addition, we, as a manufacturer, produce both warranty and post-warranty maintenance of the wood shredder MK-170TR Antistress.
By purchasing a chipper from us you get a reliable assistant on the way to your energy independence!
