Wood shredders
MK-120TR
Tractor PTO
120 mm
6 m3/h
Wood shredder MK-120TR disk type chopping branches, slats, drifts and other wood waste into the technological chips with a size of 5..50 mm. The maximum diameter of the branches is 120 mm, depending on the species and moisture of the tree. The wood shredder can change the direction of the chip flow by 360 degrees. The wood shredder is powered by a PTO of a minimum power tractor of 24 h.p. and is mounted on a three-point hitch. To connect the chipper to the tractor you need a cardan shaft T5.
Price: 1 500 Euro
Technical parameters
Extended description
OVERALL DIMENSIONS AND MASS CHARACTERISTICS
Length:
1280 mm
Width:
1290 mm
Height:
1650 mm
Weight:
180 kg
Axle mounting diameter to tractor:
22 mm
MAIN WORKING CHARACTERISTICS
Max. productivity:
6 m3/h
Soft wood max. diameter:
120 mm
Hard wood max. diameter:
100 mm
Size of splinter:
5...50 mm
Quantity of knives:
4 pcs
Max. turns on cutting knives:
540 rpm
TRACTOR CHARACTERISTICS
Engine min. power:
25 h.p.
Max. turns on PTO:
540 rpm

Wood shredder MK-120TR disk type is designed for processing and utilization by grinding branches, rods, duplexes, lamellas and other wood waste. Wood shredder turns raw materials into technological chips. Up to 90% of the resulting chips will be 5 ... 50 mm in size, 10% in free size, when grinding thin branches, it is possible to increase or decrease the fraction. The size of the chips is not regulated and basically depends on the type of feed material. Wood shredder MK-120TR is capable of cutting branches up to 12 cm in diameter, depending on the moisture and wood species. Finished chips can be used for heating in solid fuel and pyrolysis boilers, fireplaces, stoves and other heating appliances.
Also, wood splinter can be used as mulch material for plants or fertilizer. With further processing from wood chips, it is possible to obtain fuel pellets or granules.

The working body of the MK-120TR is a disk on which 4 knives are located, on the opposite side of the disk there are blades which create the necessary air pressure to feed the chips on the unloading funnel. The knives are made of 40H steel and are double-sided which significantly extends the life of the knives of the chipper. Necessarily the knives undergo the heat treatment process on a modern HIGH FREQUENCY INDUCTION HEATING MACHINE installation.The productivity of the MK-120TP chipper is as much as 6 cubic meters of finished chips per hour of operation. Productivity directly depends on the quality of raw material preparation and the number of personnel involved in the work.

Wood shredder MK-120TR is powered by PTO tractor and mounted on a standard three-point hitch. The minimum required power of the tractor for working with the chopper is 25 hp. To connect the tractor to the shredder, we recommend using a cardan shaft of class T5 with a friction clutch that protects the chopper and the tractor from overloading.On the wood shredder there is an unloading funnel that allows you to change the direction of the flow of chips in two planes and rotates by 360˚. By raising the shredder on the hydraulic coupler, you can increase the loading height. The input hopper is equipped with a transparent PVC shutter to protect the operator from chips during operation.

The wood shredder MK-120TR is completely manufactured at our enterprise. We control the quality of all stages of our production, all landing surfaces are obligatory grinding. Quality control of welded joints is carried out. Before painting, all structures are stripped. The wood shredder is covered with powder paint, which significantly extends the service life of the structures.We are confident in our products, so we provide a 36-month guarantee for wood shredder MK-120TR. In addition, we, as a manufacturer, produce both warranty and post-warranty maintenance of the wood shredder MB-100BD.  

By purchasing a chipper from us you get a reliable assistant on the way to your energy independence!

up