| Length | 2535 mm |
| Width | 1350 mm |
| Height | 1300 mm |
| Weight | 315 kg |
| Тип приводу | Бензинові |
| Soft wood max. diameter | 120 mm |
| Size of splinter | 5...50 mm |
| Quantity of knives | 4 pcs |
| Max. turns on cutting knives | 1650 rpm |
| Engine power | 20 h.p. |
| Max. turns on engine shaft | 3600 rpm |
| Fuel type | Regular |
| Max. fuel expenditure | 230 g/h.p.*hour |
The wood shredder MK-120BD of disk type is designed for processing and disposal by shredding branches and other wood waste. The machine turns raw materials into technological chips. Around 80% of the chips produced will measure between 5 and 50 mm, with the remaining 20% being of varying sizes. When processing thinner branches, it may be possible to adjust the chip size fraction. However, the chip size is primarily determined by the input material type and is not adjustable. The MK-120BD wood shredder can shred branches up to 120 mm in diameter, depending on the moisture content and wood species. The wood chips produced can be used as fuel for pyrolysis and solid fuel boilers, fireplaces, stoves, and other heating devices. Wood chips can also be used as mulching material for plants. With further processing from wood chips, it is possible to obtain fuel pellets or granules.
The working body of the wood chipper MK-120BD is a disk on which 4 knives are located, on the opposite side of the disk there are blades on it that create the necessary air pressure to supply wood chips through the discharged chute. The wood shredder blades are disc-shaped and made of 55WCrV8 steel, which significantly extends their service life. This shape allows the user to turn the blade when one edge is worn and continue operating with the sharp side. Additionally, the blade's shape improves branch tightening. The blades undergo a heat treatment process using a modern HF-induction heating machine.
The productivity of the wood chipper MK-120BD is a maximum of 6 cubic meters of finished wood chips per hour, and it directly depends on the quality of preparation of raw materials and the number of personnel involved in the work.
The wood shredder MK-120BD is equipped with a WEIMA gasoline engine with a capacity of 20 hp. the fuel consumption of which is only 800 gr/hour. This engine is one of the highest quality in Ukraine, service centers are located in every region. The engine is protected from overloads by a special friction clutch of our design. The engine is covered by a separate 12-month manufacturer's warranty.
The MK-120BD is integrated into the trailer in such a way that the height of the input hopper allows you to conveniently work with the equipment. The construction is fully galvanized for weatherproof. The wood shredder has a discharged chute that allows you to change the direction of the flow of chips in two planes and rotates 360˚.
The MK-120BD is completely produced at our enterprise. We control the quality of all production stages, and all landing surfaces undergo mandatory grinding. Quality control of welded seams is carried out.
Before painting, all structures are cleaned. The grinder is covered with powder paint, which significantly extends the service life of the structures.
We are confident in our products, so we provide a 36-month warranty for the MK-120BD wood chipper. In addition, we, as a manufacturer, provide both warranty and post-warranty service for the MK-120BD wood chipper.
By purchasing a chipper from us, you get a reliable assistant on the way to your energy independence!
Inform the manager of the company about the desire to purchase the grinder in installments. Call or fill out the feedback form right now.
