Wood shredder MB-60BD drum type is designed for processing and utilization by grinding branches, bushes, rod and other wood waste. Wood shredder turns raw materials into technological splinter. Up to 90% of the resulting chips will be 5 ... 50 mm in size, 10% in free size, when grinding thin branches, it is possible to increase or decrease the fraction. The size of the splinter is not regulated and basically depends on the type of feed material. The shredder MB-60BD is capable of cutting branches up to 6 cm in diameter, depending on the moisture and wood species. Finished chips can be used for heating in solid fuel and pyrolysis boilers, fireplaces, stoves and other heating appliances. Also, wood chips can be used as mulch material for plants or fertilizer.
The main difference between the MB-60BD chipper is the principle of operation, the rotor has a drum on which there are 2 knives for the entire length of the drum, the drum rotates at a speed of 2400 rpm, so that the necessary air pressure is created to feed the chips on the unloading funnel. The knives are made of 40H steel and are double-sided which significantly extends the life of the knives of the wood shredder. Necessarily the knives undergo the heat treatment process on a modern HIGH FREQUENCY INDUCTION HEATING MACHINE installation.
The productivity of the wood shredder MB-60BD is 2 cubic meters of finished splinter per hour of operation. Productivity directly depends on the quality of raw material preparation and the number of personnel involved in the work.The wood shredder MB-60BD is equipped with a gasoline engine of the brand WEIMA with an output of 7 hp. fuel consumption of which is only 400 g / h. This engine is one of the most high-quality on the territory of Ukraine, service centers are located in each region. The engine is protected against overload by a special friction clutch of our design. The engine has a separate warranty from the manufacturer for a period of 12 months.
Wood shredder MB-60BD is equipped with wheels for the convenience of moving the chipper on the territory.
The wood shredder MB-60BD is completely manufactured at our enterprise. We control the quality of all stages of our production, all landing surfaces are obligatory grinding. Quality control of welded joints is carried out. Before painting, all structures are stripped. The wood shredder is covered with powder paint, which significantly extends the service life of the structures.We are confident in our products, so we provide a 36-month guarantee for wood shredder MB-60BD. In addition, we, as a manufacturer, produce both warranty and post-warranty maintenance of the wood shredder MB-60BD.
By purchasing a chipper from us you get a reliable assistant on the way to your energy independence!