| Length | 1611 mm |
| Width | 834 mm |
| Height | 819 mm |
| Weight | 120 kg |
| Inlet slot size | 130х165 mm |
| Axle mounting diameter to tractor | 28 and 19 mm |
| Тип приводу | Тракторний |
| Max. productivity | 4 m3/h |
| Soft wood max. diameter | 80 mm |
| Hard wood max. diameter | 60 mm |
| Length of ready pieces | 60...120 mm |
| Quantity of knives | 6 pcs |
| Max. turns on cutting knives | 220 rpm |
| Rec. engine power | 20 h.p. |
| Engine min. power | 16 h.p. |
| Max. turns on PTO | 540 rpm |
The wood chipper AM-80TR is designed for processing and recycling by cutting branches, laths, boards, slats and other wood waste. The shredder of the branches turns the raw material into pieces with a length of 6 ... 12 cm, this size is not regulated but depends on the diameter (thickness) of the raw material. The wood chipper AM-80TR is able to cut branches up to 8 cm in diameter, depending on the moisture and wood species. Chopped branches are ideal fuel for pyrolysis and solid fuel boilers, fireplaces, stoves and other heating appliances, as well as for the production of charcoal.
The productivity of the AM-80TR makes up to 4 cubic meters of finished products per hour. Productivity depends on the raw materials and on the quantity of the personnel involved in work.
The wood chipper AM-80TR is driven by the tractor's PTO shaft and mounted on a standard three-point linkage. The minimum required power of the tractor for working with the chopper branches is 16 hp. To connect the tractor to the shredder of the branches, we recommend using a cardan shaft of class T2 with a friction clutch that protects the mill chopper and tractor from overloads.
The working element of the wood chipper is knives. The wood chipper AM-80BD has 6 knives, the knives are made of AISI 5140 steel, have a double grinding angle and necessarily pass the heat treatment process on a modern HIGH FREQUENCY INDUCTION HEATING MACHINE installation. Cutting knives are inserted into the milled groove of the working shaft, this technology significantly reduces the load on the fixing bolts of the knives.
On the wood chipper AM-80TRan unloading hopper is installed that can pack finished products into grids. The unloading hopper has one attachment under the mesh. For wood chipper AM-80TR, standard mesh sizes of 50x80 cm are suitable.
The input hopper of the branch chipper is equipped with a curtain made of transparent PVC to protect the operator from chips during operation.
The wood chipper AM-80TR is completely produced at our enterprise. We control the quality of all stages of our production, all landing surfaces are obligatory grinding. Quality control of welded joints is carried out. Before painting, all constructions are stripped. The shredder is covered with powder paint, which significantly extends the life of the constructions.
We are confident in our products; therefore, we provide a 36-month guarantee for the AM-80TR. In addition, we, as a manufacturer, produce both guarantee and post-warranty maintenance of the wood chipper AM-80TR.
By purchasing a wood chipper from us you get a reliable assistant on the way to your energy independence!
