What happens if I put a branch with a diameter larger than the maximum?
During the overloads of the wood chipper, a safety clutch or thermal relay activates, which will prevent damage to the machine on time.
Which boilers are suitable for branch logs cut with your wood chippers?
Products produced by our machines can be used as fuel for pyrolysis and solid fuel boilers, fireplaces, stoves and during the production of charcoal as well.
What is the fuel consumption of your engines?
We install 4-stroke gasoline engines. 7 HP Engine Consumption - 500 g / h.18 HP Engine Consumption - 800 g / h
What is the lifetime of the blades?
It is possible to cut up to 200-300 m3 before resharpening.
Do you have cashless payments?
Yes, we do.
How many knives do you have on the shafts in the wood chippers? How many knives are therein the wood shredders?
6 knives in all wood chippers (3 on each shaft). 4 or 2 knives in wood shredders (depending on the model).
Is it possible to buy a machine without an engine?
Yes, but in this case you will not get a warranty.
Can I buy your products on credit?
Yes, there is such possibility. Leave your contacts in order field and we’ll contact you.
What happens if it pulls me in?
The length of the input hopper will not let you reach the blades. But please don't try it. Also, all our machines have a safety bar, so if you press it - the machine stops immediately.
At what speed of the PTO tractor does the wood chipper work?
All shredders operate at a PTO rotation speed of 540 rpm. If you need to increase the power, you can switch to 1000 rpm.
How long the are the chunks which the wood chipper cut? How can I regulate it?
It is impossible to adjust the length of the chunks. There is an inverse relationship between the length and diameter of the branch. The thicker the branch, the shorter the chunk. The wood chipper AM-60 cuts into pieces of 5-8 cm long. The wood chipper AM-160 cuts into pieces of 12-24 cm long.
What is the minimum thickness of the branch which your chipper can cut?
The gap between the knives is less than one millimeter. Everything which is thicker will be cut.
What else can your chipper cut?
Our shredders successfully handle rolls of wallpaper, paper spools, smuggled cigarettes, corn stalks, vines, etc.
What main consumables for wood chippers need to be changed?
Knives are the main consumables. They need to be sharpened once per 200-300 cubic meters of firewood. It is also necessary to change the V-belts, oil and filter of the gasoline engine periodically.
What are the major sweeper supplies you need to change?
Supplies include brushes and belts.
On which surfaces can a cleaner be used?
The ARPAL OV-320BD rotary brush is intended for cleaning of paving slabs, asphalt, concrete slabs, joints and other surfaces from weeds, marshes, earth, grass and complex dirt.
How many brushes are there?
The life of the brushes is individual, depending on the surface on which the brush is applied, the type and extent of contamination, the presence of debris, gravel and more.
What oil is used in the engine?
The crankcase is filled with oil for 4-stroke 10W30 or 10W40 engines.
Какие расходные материалы нужно менять в мульчере?
К расходным материалам относятся ножи, молотки, моторное масло, ремни, воздушный фильтр, свечи зажигания и кулачки в фрикционной муфте.
Что случиться, если мульчер попадет на муравейник, грунт от кротовой норы, или небольшой куст?
Мульчер без проблем справляется с подобными препятствиями.
С каким видом транспорта и спецтехники может работать мульчер?
Мульчер можно прицепить к любому транспортному средству с фаркопом. Например: автомобиль, прицеп мотоблока, квадроцикл, автомобиль и тп. Также, мульчер можно прицепить к креплению "серьга" для сельскохозяйственных прицепов.
Можно ли работать мульчером на поверхностях с наклоном?
Мульчером можно работать на поверхностях с наклоном до 45 градусов.
What are the consumables in the vacuum cleaner?
Consumables include belts, shielding plates inside the housing, hose, clutch cams, engine oil, spark plugs, and starter cord.
What consumables does the stump grinder have?
Consumables include drive belts and replacement teeth.
What consumables does the feed chopper have?
Consumables include knives, belts, hammers and cams in the friction clutch.