Wood shredders
170 mm
12 m3/h
Wood shredder MK-170TR-E disk type chopping branches, slats, drifts and other wood waste into the technological chips with a size of 5..60 mm. The maximum diameter of the branches is 170 mm, depending on the species and moisture of the tree. The wood shredder can change the direction of the chip flow by 360 degrees.
Technical parameters
Extended description
2400 mm
1800 mm
2500 mm
950 kg
Max. productivity:
12 m3/h
Soft wood max. diameter:
170 mm
Hard wood max. diameter:
130 mm
Size of splinter:
5...60 mm
Quantity of knives:
4 pcs
Engine power:
30 kW

Wood shredder MK-170TR-E disk type is designed for processing and utilization by grinding branches, rods, duplexes, lamellas and other wood waste. Wood shredder turns raw materials into technological chips. Up to 90% of the resulting chips will be 5 ... 60 mm in size, 10% in free size, when grinding thin branches, it is possible to increase or decrease the fraction. The size of the chips is not regulated and basically depends on the type of feed material. Wood shredder MK-170TR-E is capable of cutting branches up to 17 cm in diameter, depending on the moisture and wood species. Finished chips can be used for heating in solid fuel and pyrolysis boilers, fireplaces, stoves and other heating appliances. 
Also, wood splinter can be used as mulch material for plants or fertilizer. With further processing from wood chips, it is possible to obtain fuel pellets or granules.

The working body of the MK-170TR-E is a disk on which 4 knives are located, on the opposite side of the disk there are blades which create the necessary air pressure to feed the chips on the unloading funnel. The knives are made of 55WCrV8 steel hich significantly extends the life of the knives of the chipper. Necessarily the knives undergo the heat treatment process on a modern HIGH FREQUENCY INDUCTION HEATING MACHINE installation.The productivity of the MK-170TR-E chipper is as much as 12 cubic meters of finished chips per hour of operation. Productivity directly depends on the quality of raw material preparation and the number of personnel involved in the work.

The wood shredder MK-170TR-E is completely manufactured at our enterprise. We control the quality of all stages of our production, all landing surfaces are obligatory grinding. Quality control of welded joints is carried out. Before painting, all structures are stripped. The wood shredder is covered with powder paint, which significantly extends the service life of the structures.We are confident in our products, so we provide a 36-month guarantee for wood shredder MK-170TR-E. In addition, we, as a manufacturer, produce both warranty and post-warranty maintenance of the wood shredder MK-170TR-E.  

By purchasing a chipper from us you get a reliable assistant on the way to your energy independence!

Arpal Customers