|Max. productivity:||4 m3/h|
|Soft wood max. diameter:||100 mm|
|Hard wood max. diameter:||80 mm|
|Size of splinter:||5...50 mm|
|Quantity of knives:||2 pcs|
|Max. turns on cutting knives:||2400 rpm|
|Engine power:||18 h.p.|
|Max. turns on engine shaft:||3600 rpm|
|Max. fuel expenditure:||230 g/h.p.*hour|
Wood shredder MB-100BD drum type is designed for processing and utilization by grinding branches, and other wood waste. Wood shredder turns raw materials into technological splinter. Up to 90% of the resulting chips will be 5 ... 50 mm in size, 10% in free size, when grinding thin branches, it is possible to increase or decrease the fraction. The size of the splinter is not regulated and basically depends on the type of feed material. The shredder MB-100BD is capable of cutting branches up to 10 cm in diameter, depending on the moisture and wood species. Finished chips can be used for heating in solid fuel and pyrolysis boilers, fireplaces, stoves and other heating appliances. Also, wood chips can be used as mulch material for plants or fertilizer. With further processing from wood chips, it is possible to obtain fuel pellets or granules.
The main difference between the MB-100BD chipper is the principle of operation, the rotor has a drum on which there are 2 knives for the entire length of the drum, the drum rotates at a speed of 2400 rpm, so that the necessary air pressure is created to feed the chips on the unloading funnel. The knives are made of 55WCrV8 steel and are double-sided which significantly extends the life of the knives of the wood shredder. Necessarily the knives undergo the heat treatment process on a modern HIGH FREQUENCY INDUCTION HEATING MACHINE installation.
The productivity of the wood shredder MB-100BD is 4 cubic meters of finished splinter per hour of operation. Productivity directly depends on the quality of raw material preparation and the number of personnel involved in the work.The wood shredder MB-100BD is equipped with a gasoline engine of the brand WEIMA with an output of 18 hp. fuel consumption of which is only 800 g / h. This engine is one of the most high-quality on the territory of Ukraine, service centers are located in each region. The engine is protected against overload by a special friction clutch of our design. The engine has a separate warranty from the manufacturer for a period of 12 months.
Wood shredder MB-100BD installed on a rigid frame of a profile pipe that is equipped with wheels for the convenience of moving the chipper on the territory. On the shredder there is an unloading funnel that allows you to change the direction of the flow of chips in two planes and rotates by 360˚.Wood shredder MB-100BD is equipped with a special safety knob which is located on the edge of the entrance hopper and serves for an emergency stop of the chipper at work. Also, the input hopper is equipped with a curtain made of transparent PVC to protect the operator from chips during operation.
The wood shredder MB-100BD is completely manufactured at our enterprise. We control the quality of all stages of our production, all landing surfaces are obligatory grinding. Quality control of welded joints is carried out. Before painting, all structures are stripped. The wood shredder is covered with powder paint, which significantly extends the service life of the structures.We are confident in our products, so we provide a 36-month guarantee for wood shredder MB-100BD. In addition, we, as a manufacturer, produce both warranty and post-warranty maintenance of the wood shredder MB-100BD.
By purchasing a chipper from us you get a reliable assistant on the way to your energy independence!