Wood splitters
DK-640 Combined
500 mm
30 m3/work shift
Wood splitter DK-640 combined rack-type type is designed for chopping wood of any kind of wood and any humidity up to 640 mm. Splitter is a combined, equipped with a petrol engine of 6.5 hp. and at the same time an electric motor with a power of 2.2 kW with a power supply of 220 V. The pusher of the wood splitter acts on the log with a force of 12 tons so the wood splitter is not afraid of any boughs. The wood splitter frame has wheels for easy moving.
Technical parameters
Extended description
2200 mm
1200 mm
1200 mm
250 kg
Max. productivity:
30 m3/work shift
Log max. length:
640 mm
Log max. diameter:
500 mm
Force of splitting:
12 t
Speed of rod move:
1,5 s
Engine power:
7 h.p.
Max. turns on engine shaft:
3600 rpm
Fuel type:
Fuel expenditure:
500 g/h
220 V

The wood splitter DK-640 combined mechanical is designed for chopping firewood of any kind of wood and any humidity up to 500 mm in diameter and up to 640 mm in length. The wood splitter operates according to the principle of operation of the pusher driven by a rack. When working, the wood splitter can develop a force of up to 12 tons, which allows it to cope with any kind of wood and any knots. The speed of the wood splitter is only 1.5 seconds, which is much higher than the speed of the splitting of hydraulic splitters. Due to these characteristics, the productivity of the wood splitter lies in the range from 15 to 30 m3 per shift. Productivity directly depends on the quality of raw material preparation and the number of personnel involved in the work.

The main working element of the wood splitter is a knife on which the process of cutting is directly passing. The woodcutter knife is made of high-quality steel which necessarily passes the heat treatment process at our enterprise with the help of modern HIGH FREQUENCY INDUCTION HEATING MACHINE installation. Combined woodcutter DK-640 is equipped with two drives, petrol and electric, which allows you to use the wood splitter both directly at the cutting site and indoors without fear of harmful exhaust gases. 

On the wood splitter is installed a petrol drive with a capacity of 6.5 hp. brand Sadko, fuel consumption of this engine is only 500 grams of gasoline A-92 for 1 hour of operation. The engine is equipped with a friction clutch of our design that protects the whole mechanism of the wood splitter from excessive loads. On the other hand, an electric motor with a power of 2.2 kW is installed on the wood splitter, which is connected to the grid via a magnetic starter with a thermal relay that operates under excessive loads. At your request, a 380 V motor can be installed on the wood splitter, and the motor with 220 V power supply without loss of power of the wood splitter. Also on the shaft of the electric motor, a friction clutch is installed as an additional degree of protection for the wood splitter.  The woodcutter combined DК-640 is established on a rigid frame from an I-beam and a profile pipe. On the frame there are two pneumatic wheels for the convenience of moving the wood splitter through the territory. The wood splitter table has special stiffeners that allow you to withstand large logs. 

The wood shredder DK-640 combined is completely manufactured at our enterprise. We control the quality of all stages of our production, all landing surfaces are obligatory grinding. Quality control of welded joints is carried out. Before painting, all structures are stripped. The wood shredder is covered with powder paint, which significantly extends the service life of the structures.We are confident in our products, so we provide a 12-month guarantee for wood shredder DK-640 combined. In addition, we, as a manufacturer, produce both warranty and post-warranty maintenance of the wood splitter DK-640.  

By purchasing a chipper from us you get a reliable assistant on the way to your energy independence!

Arpal Customers