Wood chipper AM-80E
Wood chippers
80 mm
4 m3/h
The wood chipper AM-80E cuts branches, slats, and other wood waste into billets 60-120 mm long. The maximum diameter of the branches is 80 mm, depending on the species and the humidity of the tree. Finished firewood enters the hopper which has the ability to package the product into a 500x800 mm grid. The shredder is equipped with an electric motor with a power of 4 kW and operates on a 380 V network. On the chopper frame there are wheels that make it easy to move it across the territory.
Price: 1 040 Euro
Technical parameters
Extended description
1485 mm
825 mm
1230 mm
170 kg
Inlet slot size:
130х165 mm
Max. productivity:
4 m3/h
Soft wood max. diameter:
80 mm
Hard wood max. diameter:
60 mm
Length of ready pieces:
60...120 mm
Quantity of knives:
6 pcs
Max. turns on cutting knives:
220 rpm
Engine power:
4 kW
Max. turns on engine shaft:
3000 rpm
380 V

The wood chipper AM-80E is designed for processing and recycling by cutting branches, laths, boards, slats and other wood waste. The shredder of the branches turns the raw material into pieces with a length of 6 ... 12 cm, this size is not regulated but depends on the diameter (thickness) of the raw material. The wod chipper AM-80E is able to cut branches up to 8 cm in diameter, depending on the moisture and wood species. Chopped branches are ideal fuel for pyrolysis and solid fuel boilers, fireplaces, stoves and other heating appliances, as well as for the production of charcoal. The productivity of the AM-80E makes up to 4 cubic meters of finished products per hour. Productivity depends on the raw materials and on the quantity of the personnel involved in work.

The wood chipper AM-80E is equipped with an electric motor with a power of 4 kW with a power of 380V. On the shredder is installed the engine control panel which has a system of engine protection against overloads. The installation of the electric motor makes it possible to use the chopper of the branches inside the premises without fear of the harmful exhaust gases of the gasoline drives.

The working element of the wood chipper is knives. The wood chipper AM-80E has 6 knives, the knives are made of 40H steel, have a double grinding angle and necessarily pass the heat treatment process on a modern HIGH FREQUENCY INDUCTION HEATING MACHINE installation. Cutting knives are inserted into the milled groove of the working shaft, this technology significantly reduces the load on the fixing bolts of the knives.

The wood chipper AM-80E is mounted on a rigid frame of a profile pipe that is equipped with wheels for the convenience of moving the wood chipper through the territory. Two pneumatic wheels and two swivel wheels with a brake are mounted on the frame for the convenience of maneuvering and fixing the chopper in place. On the chopper AM-80E branches an unloading hopper is installed that can pack finished products into grids. The unloading hopper has one attachment under the mesh. For wood chipper AM-80E, standard mesh sizes of 50x80 cm are suitable.

The wood chipper AM-80E is completely produced at our enterprise. We control the quality of all stages of our production, all landing surfaces are obligatory grinding. Quality control of welded joints is carried out. Before painting, all constructions are stripped. The shredder is covered with powder paint, which significantly extends the life of the constructions.

We are confident in our products; therefore, we provide a 36-month guarantee for the AM-80E. In addition, we, as a manufacturer, produce both guarantee and post-warranty maintenance of the wood chipper AM-80E.

By purchasing a wood chipper from us you get a reliable assistant on the way to your energy independence!