|Inlet slot size:||200x280 mm|
|Height of the conveyor:||3,5 m|
|Max. productivity:||12 m3/h|
|Soft wood max. diameter:||160 mm|
|Hard wood max. diameter:||140 mm|
|Length of ready pieces:||120...240 mm|
|Quantity of knives:||6 pcs|
|Max. turns on cutting knives:||220 rpm|
|Engine power:||29 h.p.|
|Max. turns on engine shaft:||3600 rpm|
Wood chipper AM-160BD-K PRO is designed for processing and recycling by cutting branches, rods, duplexes, lamellas and other wood waste. The shredder of the branches turns the raw material into pieces with a length of 12 ... 240 cm, this size is not regulated but depends on the diameter (thickness) of the raw material. The wood chipper AM-160BD-K PRO is capable to cut branches up to 16 cm in diameter depending on humidity and wood species. Chopped branches are ideal fuel for pyrolysis and solid fuel boilers, fireplaces, stoves and other heating appliances, as well as for the production of charcoal.
The productivity of the wood chipper AM-160BD-K PRO is 4 cubic meters of finished products per hour. Productivity directly depends on the quality of raw material preparation and the number of personnel involved in the work.
Wood chipper AM-160BD-K PRO is equipped with a gasoline engine LIFAN 29 hp. This engine is one of the most high-quality on the territory of Ukraine, service centers are located in each region. The engine is protected against overload by a special friction clutch of our design. The engine has a separate warranty from the manufacturer for a period of 12 months.
The working element of the wood chipper is knives. The wood chipper AM-160BD-K PRO has 6 knives, the knives are made of AISI 5140 steel, have a double grinding angle and necessarily pass the heat treatment process on a modern HIGH FREQUENCY INDUCTION HEATING MACHINE installation. Cutting knives are inserted into the milled groove of the working shaft, this technology significantly reduces the load on the fixing bolts of the knives.
The wood chipper AM-160BD-K PRO is equipped with a conveyor which allows feeding the chopped raw material directly to the car trailer or to a special container (container, big bag). The conveyor allows you to significantly increase labor productivity and reduce the number of personnel when working. In conveyors we use only quality PVC tapes produced in Poland and Holland.
The wood chipper AM-160BD-K PRO is equipped with a special safety handle which is located on the edge of the input hopper and serves for an emergency stop of the grinder of branches during operation. Also, the input hopper is equipped with a curtain made of transparent PVC to protect the operator from chips during operation.
The wood chipper AM-160BD-K PRO is loaded on the rotation platform, that allows to rotate the machine on 360°
The wood chipper AM-160BD-K PRO is completely produced at our enterprise. We control the quality of all stages of our production, all landing surfaces are obligatory grinding. Quality control of welded joints is carried out. Before painting, all constructions are stripped. The shredder is covered with powder paint, which significantly extends the life of the constructions.
We are confident in our products; therefore, we provide a 36-month guarantee for the AM-160BD-K PRO. In addition, we, as a manufacturer, produce both guarantee and post-warranty maintenance of the wood chipper AM-160BD-K PRO.
By purchasing a wood chipper from us you get a reliable assistant on the way to your energy independence!